How do I install the Dainolite Porscha 4 Light 34 Inch Pendant? (Dainolite Porscha 4 Light Pendant Instruction Manual)

Answer

manuals.plus

Mar 21, 2025 - 04:51 AM


To install the Dainolite POR-344P Porscha 4 Light 34 Inch Pendant, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:

1. Before starting the installation, make sure the power is turned off at the circuit breaker or fuse box.

2. Carefully unpack the pendant and ensure that all parts are included and undamaged.

3. Determine the desired location for the pendant and mark the spot on the ceiling where the pendant will be installed.

4. Install the mounting bracket onto the ceiling using the provided screws and anchors. Ensure that the bracket is securely attached.

5. Connect the electrical wires from the ceiling to the wires of the pendant. Follow the color-coded instructions in the manual for proper wiring.

6. Once the wires are connected, carefully lift the pendant and hang it onto the mounting bracket. Ensure that the pendant is securely attached.

7. Adjust the height of the pendant by adjusting the length of the suspension cables. Follow the instructions in the manual for proper adjustment.

8. Once the pendant is properly installed and adjusted, turn on the power at the circuit breaker or fuse box to test the pendant.

Please note that this is a general guide, and it is important to refer to the specific instructions provided in the Dainolite POR-344P Porscha 4 Light 34 Inch Pendant instruction manual for accurate and detailed installation steps.