How do I install Dainolite Poseidon 1 Light 24 inch Aged Brass fixture? (Dainolite Poseidon Aged Bras Instruction Manual)

Answer

manuals.plus

Mar 21, 2025 - 04:49 AM


To install the Dainolite PSO-241P-AGB-692 Poseidon 1 Light 24 inch Aged Brass fixture, please follow the instructions below:

1. Turn off the power: Before starting the installation, make sure to turn off the power supply to the electrical circuit you will be working on.

2. Mounting the fixture: Determine the desired location for the fixture and mark the position for mounting. Use the provided mounting bracket to secure the fixture to the wall or ceiling, following the appropriate installation method for your specific application.

3. Electrical connections: Connect the electrical wires from the fixture to the corresponding wires in the electrical box. The fixture requires a single E26 base bulb with a maximum wattage of 100W, which is not included. Make sure to match the wire colors (e.g., black to black, white to white, and green or bare copper to the ground wire).

4. Secure the fixture: Once the electrical connections are made, carefully tuck the wires into the electrical box and secure the fixture to the mounting bracket using the provided screws.

5. Test the installation: After completing the installation, turn on the power supply and test the fixture to ensure it is functioning properly.

Please note that these instructions are a general guideline, and it is always recommended to consult the specific instruction manual provided with the product for detailed and accurate installation steps.