User Manual Q&AAnswer
Mar 21, 2025 - 04:47 AM
To install the Dainolite AGB-698 Large Pendant, please follow the instructions below:
1. Before starting the installation, make sure the power supply is turned off at the circuit breaker.
2. Remove the mounting plate from the pendant canopy by unscrewing the screws.
3. Attach the mounting plate to the electrical box on the ceiling using the provided screws. Ensure that the mounting plate is securely fastened.
4. Connect the wires from the pendant to the electrical box. Match the black wire from the pendant to the black wire from the electrical box, the white wire to the white wire, and the green or copper wire to the ground wire. Use wire nuts to secure the connections.
5. Carefully lift the pendant and align the holes on the canopy with the screws on the mounting plate. Insert the screws through the holes and tighten them to secure the pendant in place.
6. Once the pendant is securely mounted, turn on the power supply at the circuit breaker and test the pendant to ensure it is working properly.
Please note that these instructions are a general guideline. It is always recommended to refer to the specific instruction manual provided with the product for detailed and accurate installation instructions.
Add New Comment