User Manual Q&AAnswer
Mar 21, 2025 - 04:44 AM
Installation of the Dainolite PSO-241P-AGB-790 Poseidon White Modern/Contemporary Cone Pendant Light can be done by following these steps:
1. Before installation, ensure that the power supply to the installation area is turned off.
2. Remove the mounting plate from the canopy by unscrewing the screws.
3. Attach the mounting plate to the electrical box on the ceiling using the provided screws and secure it tightly.
4. Connect the electrical wires from the ceiling to the corresponding wires on the pendant light fixture. Use wire connectors to secure the connections and ensure proper insulation.
5. Carefully lift the pendant light fixture and align the holes on the canopy with the screws on the mounting plate. Insert the screws through the holes and tighten them to secure the fixture in place.
6. Adjust the height of the pendant light by adjusting the length of the suspension cables. Ensure that the cables are evenly adjusted to maintain balance.
7. Once the pendant light is securely installed, turn on the power supply and test the light to ensure it is functioning properly.
For more detailed installation instructions and diagrams, please refer to the Dainolite PSO-241P-AGB-790 Poseidon White Modern/Contemporary Cone Pendant Light Instruction Manual.
Add New Comment