How do I install the Dainolite Matte Black / Grey Preston 4 Light semi-flush fixture? (Dainolite Matte Black Grey Preston 4 Light Instruction Manual)

Answer

manuals.plus

Mar 21, 2025 - 04:37 AM


To install the Dainolite PST-214P Matte Black / Grey Preston 4 Light semi-flush fixture, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Ensure that the power supply is turned off before starting the installation process.

2. Identify the location where you want to install the fixture. Make sure it is suitable for the weight and size of the fixture.

3. Remove the existing fixture, if any, by disconnecting the electrical wires and removing the mounting hardware.

4. Attach the mounting bracket to the electrical box in the ceiling using the provided screws. Make sure it is securely fastened.

5. Connect the electrical wires from the ceiling to the corresponding wires on the fixture. Use wire connectors to secure the connections. The black wire should be connected to the black wire, the white wire to the white wire, and the ground wire to the ground wire.

6. Carefully lift the fixture and align it with the mounting bracket. Secure the fixture to the bracket using the provided screws.

7. Install the light bulbs into the sockets, following the recommended wattage and type specified in the manual.

8. Turn on the power supply and test the fixture to ensure it is working properly.

Please note that these are general installation instructions. It is important to consult the specific manual for the Dainolite PST-214P Matte Black / Grey Preston 4 Light fixture for any additional or specific instructions.