Answer

Mar 21, 2025 - 04:34 AM
To install the KICHLER 49976BKTLED Ashbern Light Post Lantern, please follow the steps outlined in the installation guide provided. Here is a step-by-step guide:
1. Before starting the installation, ensure that the power is disconnected at the main circuit breaker panel or main fuse box.
2. Locate the appropriate threaded holes on the mounting strap and assemble the mounting screws into these holes.
3. Attach the mounting strap to the outlet box using the strap mounting screws. The mounting strap can be adjusted to suit the position of the fixture.
4. Follow the grounding instructions based on the type of mounting strap provided:
- If the mounting strap has a hole and two raised dimples, wrap the ground wire from the outlet box around the green ground xxxx and thread it into the hole.
- If a cupped washer is provided, attach the ground wire from the outlet box under the cupped washer and the green ground xxxx , and thread it into the mounting strap.
- If the fixture is provided with a ground wire, connect the fixture ground wire to the outlet box ground wire using a wire connector (not provided). Do not connect the ground wire to the black or white power supply wires.
5. Make the wire connections according to the provided chart for correct connections. The chart specifies which supply wire (black or red) should be connected to the black or white wire of the fixture, depending on the type of parallel cord used.
6. Push the fixture to the ceiling, ensuring that the mounting screws pass through the holes in the canopy. Take care to prevent wires from getting pinched between the canopy and ceiling.
7. Use the knobs and lockwashers provided to secure the canopy. Tighten them securely.
8. Insert the recommended bulbs into the fixture.
9. Lower the glass into the bottom cage assembly.
10. Raise the assembled bottom cage assembly over the canopy and thread in the two studded knobs. Tighten them securely.
Please refer to the provided manual for any additional information or specific details related to the installation process. If you have any further questions or need assistance, you can contact KICHLER customer support at 866-558-5706 during their operating hours (M-F 9am to 5pm EST).
Add New Comment