Answer

Mar 21, 2025 - 04:27 AM
To install the KICHLER 49898BKLED Kent 1-Light 9.75-Inch Black Integrated Outdoor Wall Light, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before starting the installation, disconnect power at the main circuit breaker panel or main fusebox to avoid the risk of electric shock.
2. Ensure that you are familiar with the National Electrical Code (NEC) and all local code specifications. If you are unsure, it is recommended to hire a certified electrician for installation.
3. Clean the fixture with a damp cloth, making sure to turn off the electric current before cleaning. Avoid using harsh cleaning products that may damage the finish.
4. The fixture complies with part 15 of the FCC Rules. It should not cause harmful interference and must accept any interference received. If you experience interference, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or consulting a professional for assistance.
5. Read and understand all instructions and illustrations in the manual before proceeding with the assembly and installation of the fixture.
6. Use all parts as indicated in the instructions. Do not substitute any parts, leave parts out, or use worn or broken parts, as this could invalidate the UL listing, C.S.A. certification, and/or ETL listing of the fixture.
7. The fixture should be connected to a single branch circuit.
8. Ensure that the mounting surface is clean, dry, flat, and 1/4" larger than the fixture housing surface.
9. Attach the mounting plate to the outlet box using the supplied screws.
10. Follow the grounding instructions provided in the manual, depending on the type of mounting strap or cupped washer provided with the fixture.
11. Make wire connections according to the reference chart provided in the manual. Connect the black or red supply wire to the corresponding wire, and connect the white supply wire to the other wire. Pay attention to the type of wire being used (parallel cord or insulated wire) and the color coding.
12. Carefully push the fixture to the wall, ensuring that the threaded xxxx passes through the center hole in the fixture.
13. Check that all connections remain secure and that wires do not get pinched.
14. Tighten the fixture to the wall using the decorative nut.
If you have any further questions or need additional assistance, you can contact Kichler customer support at 866-558-5706 during their business hours (M-F 9am to 5pm EST).
Add New Comment