User Manual Q&AAnswer
Mar 21, 2025 - 04:19 AM
To install the KICHLER 49791AUB Grand Bank 4-Light Auburn Stained Farmhouse Cage Chandelier, please follow the provided installation instructions:
1. Disconnect power at the main circuit breaker panel or main fuse box before starting and during the installation to avoid the risk of electrical shock.
2. Take the threaded pipe [A] from the parts bag and xxxx in the xxxx collar loop [B] a minimum of 6 mm (1/4"). Lock it into place with the hexnut [C].
3. Run another hexnut down the threaded pipe, almost touching the first hexnut. xxxx the threaded pipe into the mounting strap [D]. The mounting strap must be positioned with the extruded thread faced into the outlet box [E]. The threaded pipe should protrude out the back of the mounting strap. xxxx a third hexnut onto the end of the threaded pipe protruding from the back of the mounting strap.
4. Connect the mounting strap to the outlet box using the mounting strap screws [J].
5. Unscrew the threaded ring [F] from the xxxx collar loop. Take the canopy [G] and pass it over the xxxx collar loop. Approximately half of the xxxx collar loop exterior threads should be exposed. Adjust the xxxx collar loop by turning the assembly up or down in the mounting strap. Remove the canopy.
6. After finding the desired position, tighten both top and bottom hexnuts up against the bottom and top of the mounting strap.
7. Slip the canopy over the xxxx collar loop and thread on the threaded ring. Attach the chain [H] (with the fixture connected) to the bottom of the xxxx collar loop. Unscrew the threaded ring, letting the canopy and threaded ring slip down.
8. Attach the decorative loop [L] to the top of the main body [K]. Attach the chain to the fixture if required.
9. Weave the electrical wire and ground wire through the chain links [H], keeping them no more than 3 inches apart. Pass the wire through the threaded ring, canopy, xxxx collar loop, threaded pipe, and into the outlet box.
10. Follow the grounding instructions provided in the manual, depending on the type of mounting strap provided with your fixture.
11. Make the wire connections according to the provided chart in the manual, ensuring the correct connections for the black or red supply wire and the white supply wire.
12. Raise the canopy to the ceiling.
13. Secure the canopy in place by tightening the threaded ring onto the xxxx collar loop.
14. Insert the recommended bulb(s) (not supplied).
15. Slide the glass [I] over the installed bulbs and rotate it into place.
If you have any further questions or need assistance, you can contact KICHLER customer support at 866-558-5706, Monday to Friday, from 9 am to 5 pm EST.
Add New Comment