User Manual Q&AAnswer
Mar 21, 2025 - 03:32 AM
To adjust the hanging length of the chandelier, follow these steps:
1. Hook the two round arms (B) onto the loops on the bottom fixture ring (A), then hook the other ends onto the top round iron ring (C).
2. Determine the desired hanging length of your fixture by removing chain links (GG) and optionally cutting the electrical and ground wire to length. Do NOT cut electrical or ground wires until the overall length is determined.
3. Leave at least 6 inches minimum of wire past the chain holder (EE) to allow for easy connections in the next step.
4. Once the hanging length is determined, open a chain link at one end of the chain (GG). Hook the open chain link (GG) onto the chain loop (C). Close the chain links back together with pliers. For the other end, lock it to the chain holder (EE) and use the quick link (HH) to secure it tightly.
5. Pass the wires through the chain loop (C) and weave them through every third chain link (GG). Continue to pass the wires and chain through the xxxx collar (DD) and canopy (JJ).
Please refer to the assembly instructions in the manual for more detailed illustrations and guidance on adjusting the hanging length of the chandelier.
Add New Comment