User Manual Q&AAnswer
Mar 21, 2025 - 03:30 AM
Installation of the Dainolite PYA-141P Priya Black Modern/Contemporary Drum Pendant Light can be done by following these steps:
1. Ensure that the power is turned off at the circuit breaker before starting the installation process.
2. Remove the mounting plate from the canopy by loosening the screws.
3. Attach the mounting plate to the electrical box in the ceiling using the provided screws. Make sure it is securely fastened.
4. Connect the electrical wires from the ceiling to the wires of the pendant light fixture. Match the black wire to black, white wire to white, and green or bare wire to the grounding wire.
5. Securely twist the wire connectors onto the connected wires, ensuring a tight connection.
6. Carefully tuck the connected wires into the electrical box, making sure they are not pinched or damaged.
7. Lift the pendant light fixture and align the holes on the canopy with the screws on the mounting plate. Insert and tighten the screws to secure the fixture in place.
8. Adjust the height of the pendant light by adjusting the length of the cord or chain, if applicable. Follow the instructions provided in the manual for adjusting the height.
9. Once the pendant light is securely installed, turn on the power at the circuit breaker and test the light to ensure it is functioning properly.
Please note that these instructions are a general guideline and it is always recommended to refer to the specific instruction manual provided with the product for detailed and accurate installation instructions.
Add New Comment