User Manual Q&AAnswer
Mar 21, 2025 - 03:28 AM
To install the Dainolite PTO-321P-MB-BW Portobello 1 Light 32 Inch Pendant, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before installation, ensure that the power supply is turned off at the circuit breaker.
2. Remove the mounting bracket from the ceiling electrical box.
3. Connect the electrical wires from the ceiling to the wires of the pendant using wire connectors. Match the colors of the wires (black to black, white to white, and green or bare copper to the ground wire).
4. Slide the canopy over the mounting bracket and secure it with the provided screws.
5. Attach the pendant to the canopy by aligning the holes and inserting the screws through them. Tighten the screws to secure the pendant in place.
6. Adjust the height of the pendant by adjusting the length of the chain or rod, if applicable. Follow the instructions provided in the manual for this step.
7. Once the pendant is securely installed, turn on the power supply and test the light.
Please note that these instructions are a general guide. It is important to refer to the specific instructions provided in the Dainolite PTO-321P-MB-BW Portobello 1 Light 32 Inch Pendant Instruction Manual for accurate installation steps and safety precautions.
Add New Comment