User Manual Q&AAnswer
Mar 21, 2025 - 03:00 AM
To install the gembird CPU-HURACAN-X30 CPU Cooling Fan, please follow the steps below:
1. Insert the 4 clear connectors into the appropriate platforms supports 775/1165 on the motherboard.
2. Align the bracket with the transparent connectors inserted into the 4 holes of the motherboard and install it on the motherboard. Make sure the bracket is securely mounted.
3. In the prepared transparent connectors, insert the 4 black connectors and then press them down firmly.
4. Spread the thermal paste evenly over the processor. This helps with heat transfer between the CPU and the cooling fan.
5. Align the side of the heat sink clamp with the clamp point of the bracket. Press down on the clamp point of the bracket on the other side to secure the heat sink in place.
6. Connect the fan power cable to the 3-pin or 4-pin socket on the motherboard. This will provide power to the cooling fan.
Please note that it is important to refer to the official installation guide provided by gembird for more detailed instructions and illustrations. The manual can be found on their website at www.gembird.eu.
If you have any further questions or need additional assistance, please consult the manual or contact gembird customer support for further guidance.
Add New Comment