Answer

Mar 21, 2025 - 02:54 AM
To install the Allen Roth 54795 Cordless Top-Down Bottom-Up Blackout Shade, follow these steps:
1. Measure and mount the brackets:
- Lay the closed shade on a flat surface.
- Measure 7 inches from the left and right sides of the shade head rail and mark with a pencil. These marks will be your mounting bracket locations.
- For shades over 50 inches, also measure the distance between the pencil marks and mark the center location.
- For outside mounting, clip the mounting brackets onto the headrail of the shade and mark the exact location of each bracket on the wall or window molding. Pre-drill the xxxx holes and then secure the brackets with wood screws.
- For inside mounting, clip the mounting brackets onto the headrail of the shade and make pencil marks at the rear of each bracket. Remove the brackets, pre-drill the xxxx holes, and then secure the brackets to the wall or window molding with wood screws.
2. Attach the shade head rail to the mounting brackets:
- Lift the blind head rail into position, sliding the inner front edge of the head rail into the slot at the front of each mounting bracket.
- Push the head rail upward until the flexible tab at the bottom of each mounting bracket snaps onto the back of the headrail.
3. Attach the handles to the bottom and middle rails of the shade:
- Attach the handles to the center of the bottom rail and middle rail of the shade. Make sure they are properly snapped into place.
4. Optional: Removing the shade from the mounting brackets:
- To remove the shade from the mounting brackets after installation, lift up the bottom of the shade to access the flexible tab on the bottom of the brackets.
- Use a screwdriver to press in the flexible tab until the shade loosens. Repeat for all mounting brackets.
For more detailed instructions and illustrations, refer to the Allen Roth 54795 Cordless Top-Down Bottom-Up Blackout Shade Instruction Manual.
If you encounter any issues or have further questions, you can contact customer service at 866-439-9800 or email them at partsplus@lowes.com. They are available from 8 a.m. to 8 p.m. EST, Monday to Sunday.
Add New Comment