Answer

Mar 21, 2025 - 02:23 AM
To install the allen + roth 42625 Berlant LED Wall light fixture, follow these steps:
1. Before starting the installation, disconnect the power by removing fuses or turning off the circuit breakers.
2. Determine the desired location for the fixture and mark the anchor locations on the wall. Drill holes and insert the anchors.
3. Attach the preassembled wall plate to the wall by aligning the keyhole slots with the screws on the wall and sliding it down until secure.
4. Remove the socket ring from the fixture and place the shade over the socket. Secure the shade with the socket ring by turning it clockwise.
5. Install a medium-base (E26) bulb (sold separately) into the socket of the fixture.
6. If you are doing a plug-in installation, insert the plug preassembled to the power cord into a nearby electrical outlet and move the switch on the underside of the fixture to the ON position.
7. If you are doing a hardwire installation, follow the additional steps provided in the manual, including attaching the mounting bracket to the outlet box, making wire connections, and securing the fixture to the mounting bracket.
8. Once the installation is complete, turn on the electrical power at the main fuse or circuit breaker.
9. Move the switch on the underside of the fixture to the ON position.
Please note that these are general instructions and it is important to refer to the specific instructions and safety information provided in the manual for accurate installation.
Add New Comment