User Manual Q&AAnswer
Mar 21, 2025 - 02:09 AM
To control the ES-PWR-SNDBR-180-BLK Powered Soundbar using IR, you have two options depending on your setup.
1. In-Room IR Receiver with IR Remote and IR Repeater:
- Connect an IR receiver to the soundbar via an IR repeater. Make sure the receiver is positioned to receive commands reliably.
- Connect the IR repeater to the IR In port on the soundbar using a 3.5 mm mono mini cable.
- You can control additional equipment by attaching an IR flasher to the IR Out port of the repeater.
2. Programmed Automation Controller:
- Connect an IR receiver to your control system. Ensure that the receiver is positioned to receive commands reliably.
- Connect a 3.5 mm mono mini cable from the flasher output of the controller to the IR In port on the soundbar.
- Program your control system using the provided IR control protocol.
The IR codes for various functions of the soundbar, such as power toggle, power on, power off, mute toggle, volume up, volume down, and more, are provided in the manual. You can use these codes to program your IR remote or control system to control the soundbar.
Please refer to the manual for the specific IR codes and detailed instructions on how to program your IR remote or control system using the IR control protocol.
Add New Comment