User Manual Q&AAnswer
Mar 21, 2025 - 01:55 AM
To properly install the battery cartridge on the TOTAL TSTLI20018 Battery Brush Cutter, follow these steps:
1. Make sure the tool is turned off before installing or removing the battery cartridge.
2. Align the tab on the battery cartridge with the slot on the casing of the tool.
3. Slide the battery cartridge into place until it clicks into place with a small click.
4. Check that the red indicator on the battery cartridge is no longer visible. If you can see the red indicator, the cartridge is not completely locked.
5. To remove the battery cartridge, slide the button on the front of the cartridge while sliding it out of the tool.
Note: Do not install the battery cartridge forcibly. If it does not slide in easily, it is not being inserted correctly. Always make sure the tool is turned off and the battery cartridge has been removed before adjusting or checking the function of the tool to avoid accidental starting and serious personal injury.
Add New Comment