User Manual Q&AAnswer
Mar 21, 2025 - 01:40 AM
To install the KICHLER 49747WZCL18 Argyle LED 10 inch Weathered Zinc Outdoor Hanging Pendant, follow these steps:
1. Thread a small threaded pipe into the end of a small loop.
2. Pass the threaded pipe on the small loop up through the hole in the canopy.
3. Thread a lock washer onto the end of the threaded pipe protruding from the inside of the canopy.
4. Thread a hex nut onto the threaded pipe protruding from the inside of the canopy.
5. Attach the open end of one chain link to a large loop on top of the fixture body. Attach another open end of that chain link to one end of the chain.
6. Attach the open end of one chain link to a small loop on the canopy. Attach another open end of that chain link to the other end of the chain.
7. Weave the fixture wires through the chain link, keeping them no more than 3 inches apart.
8. Pass the fixture wire through the hole in a small loop on the canopy and through the hole in the canopy.
Please note that before starting the installation, it is important to disconnect power at the main circuit breaker panel or main fuse box to avoid the risk of shock.
For further instructions on grounding, wire connections, and attaching the fixture to the ceiling, please refer to the provided instruction manual.
If you have any additional questions or need further assistance, you can contact KICHLER customer support at 866-558-5706, Monday to Friday, 9am to 5pm EST.
Add New Comment