How to install KOHLER Drop-in Bath? (kohler DROP-IN Bath Instruction Manual)

Answer

manuals.plus

Mar 21, 2025 - 12:00 AM


To install the KOHLER K-1165-S1 72 Inch x 42 Inch Drop-in Bath, follow the instructions provided in the installation manual. Here is a step-by-step guide:

1. Prepare the installation area: Ensure that the installation area is clean, level, and free from any debris. Make sure the floor can support the weight of the bath.

2. Position the bath: Carefully position the bath in the desired location. Ensure that the drain hole aligns with the drainpipe.

3. Connect the drain: Install the K-11677 Bath Drain or any compatible drain according to the manufacturer's instructions. Make sure to use the included template (Drop-in, 1042557-7) for proper positioning.

4. Secure the bath: Once the drain is connected, secure the bath in place using the K-577 Under-Mount Installation Kit. Follow the instructions provided with the kit for proper installation.

5. Connect the overflow: Install the overflow according to the manufacturer's instructions. Ensure a proper seal to prevent any leaks.

6. Test the installation: Fill the bath with water and check for any leaks or issues. Adjust the drain and overflow connections if necessary.

Please note that this is a general overview of the installation process. It is essential to refer to the specific instructions provided in the KOHLER K-1165-S1 72 Inch x 42 Inch Drop-in Bath instruction manual for detailed and accurate installation steps.