Answer

Mar 20, 2025 - 11:56 PM
To install the , follow these steps:
1. Prepare the alcove: Ensure that the alcove is clean and free from any debris. Make sure the walls are properly framed and leveled.
2. Position the bath: Carefully position the bath in the alcove, ensuring that it is centered and aligned properly.
3. Connect the drain: Connect the drain according to the provided drain installation instructions. You can choose from the recommended drain options, such as the K-7213 or K-7214 cable bath drain, or the K-7259 brass toe tap bath drain.
4. Secure the bath: Use the appropriate fasteners to secure the bath to the wall studs. Follow the installation instructions for specific details on securing the bath.
5. Seal the alcove: Apply a bead of silicone sealant along the edges of the bath where it meets the alcove walls. This will help prevent water from seeping behind the wall.
6. Test for leaks: Fill the bath with water and check for any leaks around the drain and edges. If any leaks are found, reseal or tighten the connections as necessary.
Please note that these are general installation instructions. It is important to refer to the detailed installation guide provided with the product for specific instructions and any additional steps or considerations.
For further assistance or clarification, you can contact KOHLER customer support at 1-800-4KOHLER (1-800-456-4537).
Add New Comment