User Manual Q&AAnswer
Mar 20, 2025 - 11:52 PM
To insert a Micro-SIM card and connect the battery for the amber connect AGT400-la Professional LTE CAT M1-GNSS Terminal, please follow the steps below:
1. Unscrew the 4 screws located on the bottom of the device in a counter-clockwise direction.
2. Remove the cover of the device.
3. Insert the Micro-SIM card into the SIM slot. Make sure the SIM card's cut-off corner is pointing forward to the slot. SIM slot 1 is closer to the PCB, while SIM slot 2 is the upper one. Ensure that the PIN request is disabled or refer to the Security info section in the Amber Configurator for instructions on how to enter the PIN.
4. Connect the battery to the device as shown.
5. After configuration, refer to the "PC Connection (Windows)" section in the user guide to attach the device cover back.
6. xxxx in all the screws to secure the device. The device is now ready to be mounted.
Please note that it is important to follow the instructions carefully to avoid any damage to the device. For more detailed information, you can refer to the user guide provided for the amber connect AGT400-la Professional LTE CAT M1-GNSS Terminal.
Add New Comment