Answer

Mar 20, 2025 - 11:35 PM
The KOHLER K-1161 Tercet 60 Inch x 60 Inch Corner Bath can be installed as a drop-in or in a corner alcove. Here is a step-by-step guide to help you with the installation:
1. Prepare the installation area: Ensure that the floor is level and able to support the weight of the bath. Check for any obstructions or plumbing connections that may interfere with the installation.
2. Position the bath: Place the bath in the desired location, either as a drop-in or in a corner alcove. Make sure the drain location aligns with the plumbing.
3. Connect the drain: Install the recommended bath drain, such as the K-11677 or K-7213/7214 cable bath drain, according to the manufacturer's instructions. Ensure a watertight connection.
4. Secure the bath: Use the provided installation materials or follow the manufacturer's instructions to secure the bath in place. This may involve using adhesive or brackets, depending on the installation method.
5. Connect the water supply: If applicable, connect the hot and cold water supply lines to the bath. Ensure proper sealing and tight connections.
6. Test for leaks: Before using the bath, fill it with water and check for any leaks around the drain and water supply connections. Make any necessary adjustments or repairs.
7. Complete the installation: Once the bath is securely installed and leak-free, finish the installation by sealing any gaps between the bath and the surrounding walls or floor. Follow the manufacturer's instructions for recommended sealants.
Please note that this is a general guide, and it is essential to refer to the specific installation instructions provided by KOHLER for your model (K-1161). These instructions may include additional steps or considerations specific to your bath.
For further assistance or clarification, you can contact KOHLER customer support at 1-800-4KOHLER (1-800-456-4537).
Add New Comment