Answer

Mar 20, 2025 - 11:32 PM
To install the TRANS ATLANTIC ED-300 Series Crash Bar Exit Device, please follow the steps outlined in the owner's manual:
1. Determine the appropriate location for the exit device on the door. Ensure that the door meets the required specifications, such as thickness, width, and height.
2. Prepare the door by drilling holes for the mounting studs and the latch case. Refer to the provided template for accurate hole placement.
3. Insert the mounting studs into the holes on the door and secure them with the provided set screws.
4. Attach the latch case to the door using the machine screws provided. Make sure the latch case is aligned properly and securely fastened.
5. Install the rim-mounted roller strike with the shim on the door frame. Adjust the strike as necessary to ensure proper alignment with the latch case.
6. If desired, install any optional accessories, such as the ball xxxx or lever entry, using the appropriate mounting hardware.
7. Test the functionality of the exit device by operating the crash bar. Ensure that the latch retracts smoothly and the door opens and closes without any issues.
Please note that this is a general overview of the installation process. For more detailed instructions and diagrams, refer to the TRANS ATLANTIC ED-300 Series Crash Bar Exit Device Owner's Manual provided with the product.
Add New Comment