User Manual Q&AAnswer
Mar 20, 2025 - 11:27 PM
To connect your cudy LT300 router to the internet, please follow these steps:
1. Insert the Micro SIM card into the slot until you hear a click. Ensure that the SIM card meets the requirements mentioned in the manual (size and direction).
2. Connect the LAN port of the router to the PoE port of the PoE adapter using an Ethernet cable.
3. Plug the PoE adapter into a power outlet.
4. Check the LED status on the router. Once at least one bar of signal strength turns solid, it means your router is successfully connected to the internet. This process may take 2-5 minutes.
5. You can now connect to the router either via Ethernet cable or Wi-Fi.
- For a wired connection, connect your computer to the PoE Adapter's LAN ports using an Ethernet cable.
- For a Wi-Fi connection, connect to the router's Wi-Fi network using the following credentials:
- Wi-Fi Network Name: Cudy-LT300-Outdoor
- Wi-Fi Password: password
6. Launch a web browser and enter "http://cudy.net/" or "http://192.168.10.1/" in the address bar. Use "admin" as the password to log in.
7. If your SIM card requires a PIN to unlock, a page will pop up. Enter your PIN and click "Save & Apply". Wait for 15 seconds to connect to the internet.
8. Check the 4G information card on the status page. If the status shows "connected", it means your router is successfully connected to the internet.
9. If the 4G is not connected or if you want to customize the router settings, click on "Quick Setup" and follow the step-by-step instructions to customize the 4G, Wi-Fi, or other parameters.
Note: If you are unsure about the APN parameters, please contact your internet service provider. If you encounter any other problems, feel free to contact our technical support team at support@cudy.com.
Enjoy your internet connection with the cudy LT300 300 Mbps Wireless N 4G LTE Router!
Add New Comment