How do I install the HILTI S-BT-MF MT M8 7 AN6 Threaded xxxx Stud? (HILTI Stud Instruction Manual)

Answer

manuals.plus

Mar 20, 2025 - 04:47 AM


Installation Instructions for HILTI S-BT-MF MT M8 7 AN6 Threaded  xxxx  Stud:

1. Preparing the Surface:
   - Ensure that the structural steel or aluminum member is clean and free from any dirt, dust, or debris.
   - Make sure the surface is dry and free from any moisture.

2. Drilling the Hole:
   - Determine the appropriate drill bit size based on the diameter of the threaded  xxxx  stud.
   - Use a suitable drill and drill bit to create a hole in the structural steel or aluminum member.
   - The hole diameter should match the diameter of the threaded  xxxx  stud.

3. Installing the Threaded  xxxx  Stud:
   - Insert the threaded  xxxx  stud into the drilled hole, ensuring it is fully seated.
   - Use a suitable tool, such as a wrench or socket, to tighten the threaded  xxxx  stud securely.
   - Ensure that the threaded  xxxx  stud is tightened to the recommended torque specified in the manual.

4. Connection of Materials:
   - Once the threaded  xxxx  stud is securely installed, you can connect materials to the structural steel or aluminum member.
   - Follow the appropriate guidelines and procedures for connecting the materials, ensuring a proper and secure connection.

Please note that the above instructions provide a general overview of the installation process. For detailed and specific instructions, including any safety precautions, it is recommended to refer to the HILTI S-BT-MF MT M8 7 AN6 Threaded  xxxx  Stud Instruction Manual provided by the manufacturer.