User Manual Q&AAnswer
Mar 20, 2025 - 04:46 AM
To adjust the temperature and airflow on the Clean Air Optima Design Fan Heater CA-904G, follow these steps:
1. Power on the device by plugging it in. You will hear an acoustic sound and the power symbol will light up.
2. By default, the temperature is set to 25°C. To change the temperature, press the "Temperature" key on the control panel.
3. Use the "+" or "-" keys to increase or decrease the temperature. The temperature range is from 15°C to 35°C, and each key press will change the temperature by 1°C.
4. After setting the desired temperature, wait for a few seconds for the new temperature to take effect.
5. To adjust the airflow, press the "Airflow" key on the control panel.
6. Press the key again to switch between low and high airflow settings. The corresponding icon will light up to indicate the selected airflow.
7. The device also has a swing function that can be turned on or off. Press the "Swing" key to activate or deactivate the oscillation feature. The icon will light up when the swing function is enabled.
8. The device also has a timer function that allows you to set a specific operating time. Press the "Timer" key to enter the timer setting mode. Use the "+" or "-" keys to set the desired timer duration (from 1 to 12 hours).
9. Once the timer is set, the device will automatically turn off after the specified time has elapsed.
10. To view the current room temperature, the device will display it on the LED display panel. If no keys are pressed for 5 seconds, the display will show the room temperature.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment