User Manual Q&AAnswer
Mar 20, 2025 - 04:44 AM
To install the Elastomer Kit for Sim Pedals Sprint, follow these steps:
1. Remove all preload on the rubber stack by turning the lock nut towards the pedal arm using the wrench provided with your pedal set. Then, turn the black knurled adjustment nut towards the pedal arm.
2. Press with two thumbs on the rear of the pedal backplate to pop the rubber stack out of position.
3. Remove the old rubbers and add the new elastomers, discs, and spacers as desired. Refer to the elastomer stack schematics in the manual to correctly assemble the elastomer stack. Remember to place a large disc before and after every individual elastomer.
4. Pop the elastomer stack back into position.
5. Re-set the desired preload by turning the knurled nut. Ensure there is enough tension on the elastomer stack to prevent it from popping out. Do not turn the preload adjustment nut beyond the thread of the rod. If this happens, consider adding an extra spacer.
6. Lock the knurled nut by tightening the lock nut firmly against it.
7. Recalibrate the pedals in SmartControl.
For a visual demonstration of the installation process, you can refer to the tutorial video on the HEUSINKVELD YouTube channel.
If you have any further questions or need assistance, you can reach out to HEUSINKVELD support at support@heusinkveld.com.
Add New Comment