User Manual Q&AAnswer
Mar 20, 2025 - 04:25 AM
To mount the AVCOMM 6006GX2-POE Industrial 4G + 2GF L2+-L3 PoE Cyber Security Switch on a DIN Rail, follow these steps:
1. Ensure that you have a DIN Rail track that complies with the DIN EN50022 standard. Using the wrong DIN rail may result in unsafe installation.
2. Insert the upper end of the DIN-Rail clip into the back of the DIN-Rail track from its upper side.
3. Lightly push the bottom of the DIN-Rail clip into the track until it is securely in place.
4. Make sure the switch is securely attached to the DIN Rail before proceeding with any wiring or power connections.
It is important to note that you should turn off the DC power input source before connecting the DC Power supply module to the terminal block connectors. This will ensure safe installation and prevent any potential damage to the switch or other devices.
For more detailed instructions and illustrations, please refer to the AVCOMM 6006GX2-POE Industrial 4G + 2GF L2+-L3 PoE Cyber Security Switch Installation Guide provided with the product.
Add New Comment