User Manual Q&AAnswer
Mar 20, 2025 - 03:56 AM
Installation of the WELLFOR 28-in W x 36-in H LED Lighted Aluminum Rectangular mirror requires two people. Here is a step-by-step guide to help you with the installation process:
1. Placement: Decide whether you want to mount the mirror vertically or horizontally. Measure the distance between the center of the keyholes in the mounting bracket.
2. Support Location: Mark the mounting points on the wall at the same distance apart as measured in step 1. Use a level to ensure the mounting points are straight.
3. Install Screws: Use a drill to make holes on a solid wall and insert drywall anchors. Then, tighten the mounting screws into the anchors, leaving a 3/8 inch space between the xxxx head and the wall.
4. Power Off: Before connecting the mirror wires, make sure to turn off all power.
5. Connection: Use a wire connector to connect the mirror to an external power supply. Push the power supply wires into the junction box.
6. Turn on the Power: Insert the xxxx heads into the keyholes on the mirror's mounting bracket. Carefully let the mirror drop down so the xxxx heads slide into the narrow ends of the keyholes, securing the mirror in place. Then, turn on the power at the circuit breaker or reinsert the fuse.
Please note that all wiring should be done by a qualified licensed electrician. The mirror must be connected to a grounded, metal permanent wiring system or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the mirror.
For more information or assistance, you can contact WELLFOR customer support at 206.809.0093 or via email at service@wellfor.com.
Add New Comment