Answer

Mar 20, 2025 - 03:50 AM
To install the Uolfin A04787W2 Bell Shape Modern Contemporary Vanity Light, please follow these steps:
1. Turn off the power: Before starting the installation, make sure to turn off the electricity by going to the main fuse or circuit breaker box in your home and placing the main power switch in the "OFF" position. Also, ensure that the wall switch is in the "OFF" position.
2. Prepare the tools: Before assembly and installation, gather the necessary tools, which are not included with the product. Refer to the provided picture for the tools required.
3. Check the parts: Carefully remove the fixture from the carton and verify that all parts and accessories are included as shown in the illustration provided.
4. Make assembly:
- Step A1: Unscrew the xxxx nuts (F) from the back plate (E) and set them aside for later installation.
- Step A2: Pass the supply wires from the outlet box through the mounting plate (D). Secure the mounting plate (D) to the outlet box using the mounting screws (A).
- Step A3: Make wire connections by following the wire connection diagram provided. Twist the wires together with plastic wire connectors until tightly joined, and wrap each connector with approved electrical tape. Ensure that no wire strands are exposed and carefully tuck all wires into the outlet box.
- Step A4: Align the holes in the back plate (E) with the pre-assembled mounting screws and attach the back plate (E) to the mounting plate (D) using the previously removed xxxx nuts (F). Hand tighten until snug. Adjust the threaded length of the pre-assembled mounting screws if necessary.
- Step A5: Remove screws (H) from sockets (G) and carefully place the glass shades (I) on the sockets (G). Secure them with screws (H).
5. Install bulbs: Insert bulbs (not included) into the sockets (G). Please ensure that the wattage of the bulbs does not exceed the maximum recommended wattage on the socket.
6. Check installation: Verify that everything is installed properly before turning on the light.
For further details and illustrations, please refer to the provided instruction manual.To install the Uolfin A04787W2 Bell Shape Modern Contemporary Vanity Light, please follow these steps:
1. Turn off the power: Before starting the installation, make sure to turn off the electricity by going to the main fuse or circuit breaker box in your home and placing the main power switch in the "OFF" position. Also, ensure that the wall switch is in the "OFF" position.
2. Prepare the tools: Before assembly and installation, gather the necessary tools, which are not included with the product. Refer to the provided picture for the tools required.
3. Check the parts: Carefully remove the fixture from the carton and verify that all parts and accessories are included as shown in the illustration provided.
4. Make assembly:
- Step A1: Unscrew the xxxx nuts (F) from the back plate (E) and set them aside for later installation.
- Step A2: Pass the supply wires from the outlet box through the mounting plate (D). Secure the mounting plate (D) to the outlet box using the mounting screws (A).
- Step A3: Make wire connections by following the wire connection diagram provided. Twist the wires together with plastic wire connectors until tightly joined, and wrap each connector with approved electrical tape. Ensure that no wire strands are exposed and carefully tuck all wires into the outlet box.
- Step A4: Align the holes in the back plate (E) with the pre-assembled mounting screws and attach the back plate (E) to the mounting plate (D) using the previously removed xxxx nuts (F). Hand tighten until snug. Adjust the threaded length of the pre-assembled mounting screws if necessary.
- Step A5: Remove screws (H) from sockets (G) and carefully place the glass shades (I) on the sockets (G). Secure them with screws (H).
5. Install bulbs: Insert bulbs (not included) into the sockets (G). Please ensure that the wattage of the bulbs does not exceed the maximum recommended wattage on the socket.
6. Check installation: Verify that everything is installed properly before turning on the light.
For further details and illustrations, please refer to the provided instruction manual.
Add New Comment