User Manual Q&AAnswer
Mar 20, 2025 - 03:48 AM
To install the SUSSEX DGTR300 Duet Guest Towel Rail, please follow the steps below:
Step 1: Separate the fixture assemblies from the Towel Rail by unscrewing the Set Screws.
Step 2: Fold the Spring Toggle onto itself and push it through the clearance hole. Lightly tighten the Bolt to allow the Dress Ring to enable fine adjustment. Repeat this for the second wall fixing.
Step 3: Fit the Towel Rail onto the two Wall Fixings, allowing them to adjust to their positions. Ensure the Rail is level, then gently remove the Towel Rail and fully tighten the wall fixings.
Step 4: Fit the Towel Rail onto both Wall Fixings and secure it in place with the Set Screws using an Allen key.
For more detailed instructions and illustrations, please refer to the SUSSEX DGTR300 Duet Guest Towel Rail Instruction Manual provided.
Add New Comment