Answer

Mar 20, 2025 - 03:33 AM
To install the PDi PD153-004-B Ceiling and Desktop Arm Mounts, please follow the steps outlined in the instruction manual:
1. Remove the pilfer proofing xxxx , PDIBHSCS252062.
2. Place the horizontal boom's base pin into the wall bracket, ensuring it seats snugly.
3. Tighten the wall bracket pilfer xxxx , PDIBHSCS252062.
4. Slip a slim washer, PDI-586, over the mounting flange and lubricate it with the provided silicone grease, PD122-001.
5. Remove the four ¼-20 hex head bolts from the swivel collar, PD188-013.
6. Drop a fish wire through the horizontal arm section, routing it through the second shim washer, PDI-586, and pull cables through. Follow the cable routing instructions in document PD196-384.
7. Hold the plastic shim washer, PDI-586, against the bottom of the arm section, ensuring it does not overlap the swivel collar. Lubricate it with the provided silicone grease. Attach the arm assembly to the horizontal boom using the split collar, PD188-013, and four ¼-20 hex head bolts with LOCTITE® #242 Blue. Tighten the bolts to 10 ft-lbs.
8. Complete the arm installation according to the specific model installation instructions provided with that arm.
9. Install the anti-rotation bushing, PD242-681, and xxxx , PDISHCS252075.
10. Install the TV according to the specific model installation instructions provided with that TV.
Please note that the boom arm may not be compatible with all models of PDi ceiling-mounted arms or all models of TVs. It is recommended to confirm compatibility with a PDi representative or contact PDi Service for assistance.
For further assistance, you can reach PDi Service at 1-800-628-9870, extension 3486, or email t1service@pdiarm.com.
Add New Comment