Answer

Mar 20, 2025 - 03:24 AM
To assign the pan and tilt channels for each fixture on the beamZ DMX384 DMX Lighting Controller, follow these steps:
1. Turn off the controller.
2. Press and hold the PROGRAM and TAPSYNC DISPLAY buttons simultaneously.
3. Turn on the controller while still holding the PROGRAM and TAPSYNC DISPLAY buttons.
4. Use the fixture buttons or PAGE SELECT button to select the fixture whose faders you want to reassign.
5. Move one fader of the 16-channel faders to select the pan channel.
6. Press the button to select the pan/tilt TAPSYNC DISPLAY.
7. Move one fader of the 16-channel faders to select the tilt channel.
8. Press and hold the PROGRAM and TAPSYNC DISPLAY buttons to exit and save the setting. All LEDs will blink to confirm.
Note: You can reassign the pan and tilt channels to output on a different DMX channel if desired. Also, make sure to deselect the Blackout if the LED is lit.
Add New Comment