User Manual Q&AAnswer
Mar 20, 2025 - 03:22 AM
To install the chisel, follow these steps:
1. Clean the bit shank and apply bit grease before installing the chisel.
2. Pull the chuck cover down to the bottom.
3. Insert the chisel into the chuck until it is securely held in place.
4. After installing, always make sure that the chisel is securely held in place by trying to pull it out.
To remove the chisel, follow these steps:
1. Pull the chuck cover down all the way.
2. Pull the chisel out of the chuck.
Please refer to Figure 1 in the user manual for visual instructions on installing and removing the chisel.
Add New Comment