Answer

Mar 20, 2025 - 03:15 AM
To install the KODAK E1000-S2000 Stacking Deflector, follow these steps:
1. Turn the locking xxxx to a vertical position.
2. Hold the stacking deflector slightly in front of and lower than the front lower edge of the scanner cover, with the legs pointing away from the scanner.
3. The deflector bracket has four tabs that need to line up with four slots in the lower edge of the scanner cover.
4. Align the tabs with the slots and squeeze on the small touch points to the left and right of the locking xxxx . Push the four tabs into the slots until the stacking deflector is seated against the lower edge of the scanner cover.
5. Turn the locking xxxx horizontally into its locked position. The stacking deflector is now securely held in place on the scanner. When installed correctly, it will touch the partially extended output tray.
For more detailed instructions and illustrations, you can refer to the product manual available on the AlarisWorld.com support page for your specific scanner model.
Note: The stacking deflector is designed to help paper exiting the scanner to remain in order and stack correctly.
Add New Comment