How do I install the SCANSTRUT PTM-R1-R2 Tapered Radar Mast? (SCANSTRUT Tapered Radar Mast Instruction Manual)

Answer

manuals.plus

Mar 20, 2025 - 02:57 AM


To install the SCANSTRUT PTM-R1-R2 Tapered Radar Mast, follow these steps:

1. Ensure you have the necessary tools and parts required for installation. The tools required are 10DPT-SRM3-1 x1 and 10DPT-SRM3-2 x2.

2. Begin by selecting a suitable location for the mast installation. Consider factors such as clear line of sight, structural integrity, and accessibility for maintenance.

3. Once you have chosen the location, ensure that it is free from any obstructions or obstacles that may interfere with the radar's performance.

4. Attach the 10DPT-SRM3-1 to the base of the mast using the provided screws or bolts. Ensure it is securely fastened.

5. Next, attach the 10DPT-SRM3-2 to the top of the mast using the provided screws or bolts. Again, ensure it is securely fastened.

6. Carefully lift the mast and position it onto the base, aligning the holes on the mast with the holes on the base.

7. Insert the screws or bolts through the holes and tighten them securely to secure the mast to the base.

8. Once the mast is securely attached to the base, double-check all connections and fastenings to ensure everything is tight and secure.

9. Finally, connect the radar unit to the mast according to the manufacturer's instructions for your specific radar model.

Please note that these instructions are a general guide, and it is essential to refer to the specific instruction manual provided by SCANSTRUT for your PTM-R1-R2 Tapered Radar Mast for any additional or model-specific details.