Answer

Mar 20, 2025 - 02:48 AM
To connect the TIS CONTROL ADS-3R-BUS Small Relay Module to control lights, follow these steps:
1. Turn off the main electrical source before installation.
2. Connect a cat5e TIS network data cable to the TIS-BUS port as per the connection diagram.
3. Complete the load connection for lights as follows:
- Connect the load electrical wires to outputs 1-3 on the module.
- Each channel can control a maximum of 5A loads, so make sure not to overload the channels.
- The load neutral wire should be linked to the neutral connection in the DB enclosure.
4. Connect the live (supply) wire to input "C" on the module.
- All inputs must have an appropriate voltage source and an MCB to protect the load circuit.
5. Turn on the breaker. The module should turn on accordingly.
Please refer to the TIS CONTROL ADS-3R-BUS Small Relay Module Instruction Manual for more detailed information and illustrations on the installation process.
Add New Comment