Answer

Mar 20, 2025 - 02:42 AM
To change the cutting disc on the Ronix 3110 Mini Angle Grinder, please follow these steps:
1. Before installing or disassembling the disc, make sure the switch is in the "0" position and the plug is not connected to the socket.
2. Fix the inner flange onto the spindle, then put the disc onto the inner flange.
3. After that, put the outer flange on the spindle.
4. Press the spindle lock on the gearbox and xxxx the outer flange with the flange spanner included in the accessories until it is tightened.
Please refer to Figure 4 in the user manual for a visual representation of the disc changing process.
Note: The spindle lock is only used to install and disassemble the disc of the tool. It should not be used as a brake button when the tool is rotating, as this can cause damage to the tool and pose a risk of injury.
For more detailed instructions and illustrations, please refer to the "How to Change the Disc" section in the user manual provided.
Add New Comment