User Manual Q&AAnswer
Mar 20, 2025 - 02:11 AM
To install the Ardes AR4W04P Ceramic Heater for wall mounting, follow these steps:
1. Use the assembly kit provided, which includes 2 screws (Ø 4 mm) and 2 wall plugs (Ø 8 mm).
2. Determine the desired location for the heater on the wall. Ensure that the distance between the two hanging holes on the back of the appliance corresponds to the distance between the two plugs on the wall.
3. Fix the two wall plugs to the wall using the screws. Make sure to leave the heads of the screws protruding enough so that the appliance can be hung on them.
4. Hang the appliance on the screws by pushing it to the right so that the screws go into the guide above the hole. This will improve the stability of the appliance.
5. The appliance must be installed at least 1.80m above the ground and 15 cm from the ceiling.
Please refer to the "ASSEMBLY INSTRUCTIONS" section in the instruction manual for more detailed information and illustrations on the installation process.
Add New Comment