User Manual Q&AAnswer
Mar 20, 2025 - 02:03 AM
To measure DC voltage using the PeakTech 3202 Analog Voltmeter, follow these steps:
1. Start with the highest measuring range.
2. Select the corresponding measuring range (0.1V ~ 500V DCV) using the range switch.
3. Insert the black test lead into the "COM" socket and the red test lead into the "V" socket.
4. Connect the test leads in parallel to the circuit or component you want to measure.
5. Read the measured value from the analogue display.
Remember to always start with the highest measuring range and ensure that the test leads are properly connected.
Add New Comment