Answer

Mar 20, 2025 - 01:41 AM
To install the Hatco HWB-11QT-208 Built-In Heated Well into a non-combustible countertop, follow these steps:
1. Cut the appropriate opening in the countertop according to the dimensions provided in the manual.
2. Place a ribbon putty gasket around the cutout edge of the countertop to create a seal between the unit and the countertop.
3. Carefully lower the unit into the countertop opening, making sure it is centered and level.
4. Use a screwdriver to rotate the unit's EZ locking tabs outward to secure the unit to the underside of the countertop. Rotate as many tabs as needed to ensure a secure fit.
5. Trim and remove any excess ribbon putty gasket material from around the unit.
6. Connect the unit to a properly grounded electrical receptacle of the correct voltage, size, and plug configuration, or have a qualified electrician make the appropriate electrical connections.
7. If equipped with the optional Auto-Fill feature, connect the water supply to the unit according to the specifications provided in the manual.
8. Test the unit to ensure it is functioning properly.
Please refer to the installation section of the Hatco HWB-11QT-208 instruction manual for more detailed instructions and safety precautions.
Add New Comment