User Manual Q&AAnswer
Mar 20, 2025 - 01:32 AM
To adjust the power regulation on the HILTI DX 351 BT Powder Actuated Tool, follow these steps:
1. Locate the power regulation wheel on the tool. It is located near the grip and is marked with a power regulation indicator.
2. To increase the power, turn the power regulation wheel clockwise. To decrease the power, turn the wheel counterclockwise.
3. Start with the lowest power setting and perform a test fastening to ensure the threaded stud is driven to the correct depth. If the stud is not driven in to the correct position, adjust the power setting accordingly.
4. It is important to set the power to a value that drives the threaded stud to the correct depth and ensures a good seal is achieved by the sealing washer. Start with a lower power setting and increase as necessary.
5. Refer to the power regulation guide provided with the threaded studs to determine the correct power setting for the specific application.
Note: It is recommended to use original Hilti cartridges or cartridges of equivalent quality to ensure optimal performance and safety. Always refer to the operating instructions for more detailed information on power regulation and safe usage of the tool.
Add New Comment