User Manual Q&AAnswer
Mar 20, 2025 - 01:09 AM
To connect the AV-RFM-01 Radio Frequency Module to a Sealite product, please follow these steps:
1. Ensure that the Sealite product you are using is compatible with the AV-RFM-01 module. The AV-RFM-01 is designed to be used in Sealite products only.
2. Locate the serial UART interface on the host MCU (Microcontroller Unit) of the Sealite product. The AV-RFM-01 module interfaces with the host MCU through this serial UART connection.
3. Connect the AV-RFM-01 module to the host MCU using the appropriate serial UART connection. Refer to the user manual or integration instructions of the Sealite product for specific details on how to make this connection.
4. Provide power to the AV-RFM-01 module. The module requires a power supply of 3.3VDC.
5. Ensure that the ground of the AV-RFM-01 module is connected to the ground of the host device through the interface connectors. This is important for maintaining RF signal integrity.
By following these steps, you should be able to successfully connect the AV-RFM-01 Radio Frequency Module to a Sealite product. For further information and specific integration instructions, please refer to the internal, confidential manufacturing documents or contact Sealite Pty Ltd directly.
Add New Comment