User Manual Q&AAnswer
Mar 20, 2025 - 01:03 AM
To connect the Fisher Paykel OS60SDTDB1 Built-In Combination Steam Oven to the mains power supply, follow these steps:
1. Ensure that the domestic wiring system is suitable for the power drawn by the oven, as specified on the rating plate.
2. Check that the voltage corresponds to the value given on the rating plate. The OS60SDT model operates at 220-240V.
3. Make sure the oven is disconnected from the mains electricity supply before carrying out any work on the electrical section of the appliance.
4. Connect the oven to a good earth wiring system. This is essential and mandatory for safety.
5. Do not use adapters, reducers, or branching devices to connect the oven to the mains power supply, as they can cause overheating and burning.
6. If the power supply cable is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid hazards.
7. Ensure that the oven is connected to a circuit that incorporates an isolating switch providing full disconnection from the power supply, following the wiring rules.
8. The oven must be earthed for safety.
Please note that these instructions are a summary, and it is important to refer to the full installation guide provided with the oven for complete and accurate instructions.
Add New Comment