Answer

Mar 20, 2025 - 12:52 AM
To install the LUMASCAPE LS9030 Linealux L3 High-Performance Linear Grazer, please follow the steps outlined in the instruction manual provided. Here is a general overview of the installation process:
1. Ensure that the installation complies with local electrical rules and regulations. All electrical work must be performed by a licensed electrician.
2. Before starting the installation, make sure to read and understand all safety instructions provided in the manual. Failure to follow these instructions may void the warranty.
3. Position the luminaire in the desired location, taking care to mount it in a place where it will not pose a risk of overheating. The luminaire may become hot during operation.
4. The luminaire should only be used with a protective shield. If the protective shield is cracked, stop using the luminaire immediately and contact Lumascape for a replacement.
5. If the external flexible cable or cord of the luminaire is damaged, it should be replaced exclusively by Lumascape or their service agent to avoid any hazards.
6. The light source contained in the luminaire should only be replaced by Lumascape or its service agent.
7. Do not stare directly at the operating light source. Position the luminaire in a way that prevents prolonged staring at a distance closer than 46 feet (14 meters).
8. Ensure that the mains input power is surge protected and never make or break connections while the circuit is energized.
9. Keep the luminaire clean and free of debris. It can be cleaned with warm water only. Do not use chemicals or abrasives as this may void the product warranty.
10. Connections should be kept clean and dry at all times.
11. The luminaire is suitable for use indoors or outdoors.
Please refer to the instruction manual for more detailed installation instructions and specific information on wiring designations, dimensions, and any additional tools required for assembly.
For further assistance or clarification, you can visit lumascape.com for more product resources or contact Lumascape directly.
Add New Comment