Answer

Mar 20, 2025 - 12:50 AM
To install the groen 208-14-3 Intek Convection Steamer, you can place it on a standard commercial kitchen countertop or on a stainless steel stand. A hood or vent is usually not required for the steamer, so it can be placed anywhere in the kitchen. It is important to ensure that the steamer is installed in a level condition.
For countertop installation, adjust the four legs of the steamer to level it. The steamer comes with a non-slip rubber coating on the bottom of the legs to prevent sliding on the countertop.
If you are installing the unit onto a stand, bolt the unit in place at the four locations on the bottom of the cooker using the hardware provided with the stand. Level the unit by adjusting the four legs on the stand.
Please note that any in-field modifications made without written authorization from the Engineering Department will void your warranty. If you have any doubts or questions about the installation process, it is recommended to consult a qualified electrician or serviceman.
For more detailed information and instructions, please refer to the groen 208-14-3 Intek Convection Steamer User Manual.
Add New Comment