Answer

Mar 20, 2025 - 12:35 AM
To install the COOKOLOGY TUB350SS Cooker Hood, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before installation, turn off the unit and unplug it from the outlet.
2. The cooker hood should be placed at a distance of 65-75cm from the cooking surface for best effect.
3. Ensure that the ceiling can bear at least 120kgs and has a thickness of more than 30mm.
4. According to the hanging board, drill 12 holes on the ceiling. Use screws to fix the hanging board on the wooden or concrete ceiling.
5. Calculate the length of the angle iron and connect it with the bracket using screws, nuts, and gaskets. Then, connect the angle iron to the hanging board.
6. Lead one side of the expansion pipe to the outside through the hole in the ceiling.
7. Use screws to connect the inside chimney to the hanging board. Put on the outside chimney and use a hook to hold it up for the next installation.
8. Install the V-flap onto the outlet.
9. Hold up the hood and use screws to connect the hood body to the angle iron.
10. Put the expansion pipe on the outlet and connect the power supply. After ensuring everything is okay, take off the hook and lower the outside chimney.
11. The installation is now finished.
Please note that these are general installation instructions. For specific details and diagrams, refer to the manual provided with the COOKOLOGY TUB350SS Cooker Hood.
Add New Comment