User Manual Q&AAnswer
Mar 20, 2025 - 12:32 AM
To connect the power supply cable to the , follow these steps:
1. Locate the two terminal blocks on the Wallbox. One is for the electronic board power supply, and the other is for the main power supply.
2. Determine how you want to power the electronic board. You have two options:
a. If you have an allocated line that allows a possible power supply from the UPS (Uninterruptible Power Supply), connect the power supply cable to this terminal block.
b. If you don't have an allocated line, you can take L1 (phase) and N (neutral) from the main power supply. Connect the power supply cable to the respective terminals on the main power supply terminal block.
3. Ensure that the power supply cable is properly connected to the terminal block(s). Double-check the connections to ensure they are secure.
4. Once the power supply cable is connected, you can proceed with using the GEWiSS GWJ3203A Joinon Wallbox I-Con Charging Unit for charging your electric vehicle.
If you have any further questions or need additional assistance, you can contact GEWISS directly using the following contact details:
- GEWISS S.p.A.
- Via A.Volta, 1
- IT-24069 Cenate Sotto (BG)
- Italy
- Tel: +39 035 946 111
- E-mail: qualitymarks@gewiss.com, sat@gewiss.com
- Website: www.gewiss.com
- Additional phone number: +39 035 946 260
Please refer to the instruction manual provided with the product for more detailed information and illustrations on connecting the power supply cable.
Add New Comment