User Manual Q&AAnswer
Mar 20, 2025 - 12:28 AM
Sure! Here is a step-by-step guide on how to install the Magnolia M10028BN Chandelier:
1. Carefully remove the fixture from the carton and check that all parts are included, referring to the above illustration. Make sure not to misplace any parts needed for the installation.
2. Install the tube (4) and crystal block (3) onto the socket (5). The tube should fit onto the socket, and the crystal block should be placed on top of the tube.
3. Install the crystal drop (7) onto the small ring (6). The crystal drop should have a small hole or loop at the top, which can be attached to the small ring.
4. Install the loop (1) onto the xxxx (2), then secure them with the loop (1). The loop should be threaded onto the xxxx , and then tightened to secure them together.
5. Once all the parts are properly installed, the fixture is ready for lamping and installation. You can now proceed with attaching the chandelier to the ceiling according to the instructions provided in the installation guide.
Please note that this is a general guide, and it is always recommended to refer to the specific installation instructions provided with the product for any additional details or variations.
Add New Comment