Answer

Mar 20, 2025 - 12:20 AM
To install the Uolfin 4806479 4-Light Black and Gold Bathroom Vanity Light with Clear Glass Shades, follow these steps:
1. Turn off the power: Before starting the installation, make sure to turn off the electricity. Go to the main fuse or circuit breaker box in your home and place the main power switch in the "OFF" position. Also, place the wall switch in the "OFF" position.
2. Mounting surface preparation: Ensure that the mounting surface is clean, dry, flat, strong enough, and 1/4" larger than the canopy on all sides. Correct any gaps between the mounting surface and canopy exceeding 3/16" as required. Make sure the ceiling or wall can support the weight of the lamp.
3. Check voltage and wattage: Verify that the voltage you are using is 120V. The maximum wattage per bulb is Type B, Max 40W.
4. Safety precautions: Keep the lamp away from acidic and alkaline substances to avoid damaging the surface. When replacing bulbs, turn off or unplug the lamp and wait until it is cool, as bulbs get hot quickly. Follow all safety instructions provided in the manual.
5. Tools required: Before starting assembly and installation, gather the necessary tools, as shown in the included picture. These tools are not included with the product.
6. Assembly and installation: Follow the step-by-step instructions provided in the manual, which include the following key steps:
a. Unscrew the xxxx nuts from the backplate and set them aside.
b. Pass the supply wires from the outlet box through the mounting plate and secure the mounting plate to the outlet box using the mounting screws.
c. Make wire connections according to the provided chart, ensuring that the ground wire is connected correctly.
d. Align the holes in the backplate with the pre-assembled mounting screws and attach the backplate to the mounting plate using the previously removed xxxx nuts.
e. Remove screws from the sockets, place the glass shades on the sockets, and secure them with screws.
f. Install bulbs (not included) according to the recommended maximum wattage on the socket.
7. Final check and power on: Once everything is installed properly, double-check all connections and make sure the fixture is securely mounted. Then, you can turn on the light and enjoy your new Uolfin vanity light.
For further assistance or to order replacement parts, you can contact Uolfin customer support at +1 850 296 2377 during working hours (Mon - Fri 9:00 - 16:00 EST) or email them at uolfin@newdecorworld.com.
Add New Comment