Answer

Mar 20, 2025 - 12:19 AM
To install the Uolfin A04951W4 30-Inch 4-Light Matte Black and Antique Brass Transitional Vanity Light, please follow the steps below:
1. Before starting the installation, make sure to turn off the power. Go to the main fuse or circuit breaker box in your home and place the main power switch and wall switch in the "OFF" position.
2. Ensure that the mounting surface is clean, dry, flat, strong enough, and 1/4" larger than the canopy on all sides. Correct any gaps between the mounting surface and canopy exceeding 3/16" as required.
3. Check that the ceiling or wall can support the weight of the lamp before installation.
4. Make sure the voltage you are using is 120V, and the maximum wattage per bulb is Type A, Max 60W.
5. Keep the lamp away from acidic and alkaline substances to avoid damaging the surface.
6. When replacing bulbs, turn off or unplug the lamp and wait until it is cool, as bulbs get hot quickly.
7. Carefully remove the fixture from the carton and ensure that all parts and accessories are included.
8. Unscrew the xxxx nuts from the backplate and set them aside for later installation.
9. Pass the supply wires from the outlet box through the mounting plate and secure the mounting plate to the outlet box using the provided mounting screws.
10. Make wire connections according to the wire connection chart provided in the manual. Twist wires together with plastic wire connectors until tightly joined, and wrap each connector with approved electrical tape. Ensure no wire strands are exposed and tuck all wires into the outlet box.
11. Align the holes in the backplate with the pre-assembled mounting screws and attach the backplate to the mounting plate using the previously removed xxxx nuts. Hand tighten until snug.
12. Remove the socket rings from the sockets and carefully place the iron shades on the sockets. Secure the iron shades with the socket rings.
13. Install bulbs (not included) according to the recommended maximum wattage on the socket.
14. Double-check that everything is installed properly before turning on the light.
If you have any further questions or need assistance, you can contact Uolfin customer support at +1 850 296 2377 during working hours (Mon-Fri 9:00 - 16:00 EST) or email them at uolfin@newdecorworld.com.
Add New Comment